[PCB_FORUM] Re: design reuse question [Virus checked GT]

Hi Bruno,

When I do the manual placement, I see that under "Component by refdes", D_6 components are listed there, marked with "placed". But under "Module instances", I don't see D_6 but all other modules are there.

I don't understand what you have advised, can you explain it again? Also, I am not that familiar with occurence mode, please help me futher. Thank you very much.

Best regards,

Rock

On Thu, 25 Aug 2005, Bruno.Renner@xxxxxxxxxxxxxxxx wrote:

Hi Rock,
if there is any component from module  D_6 placed on board you never see
this module.
If so delete all D_6 Components from board.
What does you Concept show in occurence mode?

regards
Bruno




            Rock Shi
            <rshi@xxxxxxxxxxx
            u>                                                         An
            Gesendet von:              icu-pcb-forum@xxxxxxxxxxxxx
            icu-pcb-forum-bou                                       Kopie
            nce@xxxxxxxxxxxxx
                                                                    Thema
                                       [PCB_FORUM] design reuse question
            24.08.2005 23:44           [Virus checked GT]


             Bitte antworten
                   an
            icu-pcb-forum@fre
               elists.org






Hi,

I have met a problem in placing modules in my board design. In my
schematic, I have six blocks, and I have assigned "SUBDESIGN_SUFFIX"
properties as below:

            block name              subdesign_suffix

            A                                   1
            B                                   2
            B                                   3
            C                                   4
            D                                   5
            D                                   6

I believe I followed design reuse procedures very carefully. However,
when I opened the exported board and tried to do the placement, I only see
modules
            A_1
            B_2
            B_3
            C_4
            D_5

D_6 is always missing.

I am running SPB 15.2 in UNIX. Any help and clue would be highly
appreciated. Thanks very much in advance.


Best regards,

Rock
-----------------------------------------------------------
To subscribe/unsubscribe:
            Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
            with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
            Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------



Der Inhalt dieser E-Mail ist für den Absender rechtlich nicht verbindlich.
Informieren Sie uns bitte, wenn Sie diese E-Mail fälschlicherweise erhalten
haben (Fax: +49-7551-89-6001). Bitte löschen Sie in diesem Fall die
Nachricht. Jede Form der weiteren Benutzung ist untersagt.

The content of this e-mail is not legally binding upon the sender.
If this e-mail was transmitted to you by error, then please inform us
accordingly (Fax: +49-7551-89-6001). In such case you are requested to
erase the message. Any use of such e-mail message is strictly prohibited.

-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: