[PCB_FORUM] Re: design reuse question [Virus checked GT]

Hi Rock,
if there is any component from module  D_6 placed on board you never see
this module.
If so delete all D_6 Components from board.
What does you Concept show in occurence mode?

regards
Bruno



                                                                           
             Rock Shi                                                      
             <rshi@xxxxxxxxxxx                                             
             u>                                                         An 
             Gesendet von:              icu-pcb-forum@xxxxxxxxxxxxx        
             icu-pcb-forum-bou                                       Kopie 
             nce@xxxxxxxxxxxxx                                             
                                                                     Thema 
                                        [PCB_FORUM] design reuse question  
             24.08.2005 23:44           [Virus checked GT]                 
                                                                           
                                                                           
              Bitte antworten                                              
                    an                                                     
             icu-pcb-forum@fre                                             
                elists.org                                                 
                                                                           
                                                                           




Hi,

I have met a problem in placing modules in my board design. In my
schematic, I have six blocks, and I have assigned "SUBDESIGN_SUFFIX"
properties as below:

             block name              subdesign_suffix

             A                                   1
             B                                   2
             B                                   3
             C                                   4
             D                                   5
             D                                   6

I believe I followed design reuse procedures very carefully. However,
when I opened the exported board and tried to do the placement, I only see
modules
             A_1
             B_2
             B_3
             C_4
             D_5

D_6 is always missing.

I am running SPB 15.2 in UNIX. Any help and clue would be highly
appreciated. Thanks very much in advance.


Best regards,

Rock
-----------------------------------------------------------
To subscribe/unsubscribe:
             Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
             with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
             Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------



Der Inhalt dieser E-Mail ist für den Absender rechtlich nicht verbindlich.
Informieren Sie uns bitte, wenn Sie diese E-Mail fälschlicherweise erhalten
haben (Fax: +49-7551-89-6001). Bitte löschen Sie in diesem Fall die
Nachricht. Jede Form der weiteren Benutzung ist untersagt.

The content of this e-mail is not legally binding upon the sender.
If this e-mail was transmitted to you by error, then please inform us
accordingly (Fax: +49-7551-89-6001). In such case you are requested to
erase the message. Any use of such e-mail message is strictly prohibited.

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: