[PCB_FORUM] Re: delay tuning

Yes, I expect it to launch the auto-router (only in the back-ground) to
route the nets that you picked to meet the specified rules. Sometimes it
takes a while for this function to occur.
Call me if you have additional questions - easier to talk than to type.
Thanks
Tony Cosentino
919-460-3656 office

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Tuesday, November 08, 2005 11:52 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: delay tuning


> What cad tool are you using? What version of the tool are you using?
> This function can be accomplished in some tools such as Cadence 
> version 15.X. It allows you to tune a group of nets by drawing a 
> window over the nets. If I am not mistaken the function is 
> Route-Elongation by Pick, then just draw a window over the nets you 
> want matched. The only thing you need to be sure of before running 
> this function is that you have everything setup properly first.

Hi Tony,

I'm on 15.2, and I try "Route/Elongation by Pick" and it attempts to
bring up Specctra.  Did you expect it to bring up Specctra?

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum or go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: