[PCB_FORUM] Re: concept Hdl - symbole editor- creating discrete....

Hi 

Whil placing discrete symbols using toolbar icons (like resiste, cap, 
...symbols) in Hdl those toolbars is hiding.
I dont konw why it has happend. so i am not able to use these icons.
let me know any body solved this problems?
thank u 
Regards
felix 


----- Original Message ----
From: "Bolman, Shirley H" <shirley.h.bolman@xxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Saturday, November 17, 2007 1:02:25 AM
Subject: [PCB_FORUM] Re: concept Hdl - symbole editor- creating discrete....


Felix
It doesnʼt look like you have received any answer to your question so I will 
make an attempt.
You mention generating symbols for caps and I get the idea that you create more 
than 1 cap symbol.
Actually the maximum number of symbols for caps, resistors, or any discrete 
part is 4. That is providing
the user community you have wants to be able to place caps in any of the 4 
orientations.
This allows for the librarian to control the placement of all of the properties.
 
When you generate the symbol using part developer, you will get a square symbol 
and that is because
the tool knows how to place a body outline around any symbol with pins but does 
not know the difference
between a 2 pin resistor and a 2 pin cap.
 
After the Square symbol has been created, you need to descend into the part and 
delete the square box and 
draw in the graphics that you need for the part to look like a cap. This is the 
process that is needed for any
part that has graphics instead of a square or rectangular body. 
I hope this helps.

Shirley 

It is a PRIVILEGE to be born free. 
    It is a RIGHT to live free. 
        It is a DUTY to die free. 



From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of felix felix
Sent: Thursday, November 15, 2007 3:16 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] concept Hdl - symbole editor- creating discrete....
 
Hi all,
 
I am using cadence 15.5.1
while generating symbols for caps, i got a squire symbole instead of standard 
cap symbol.
so i have to edit squire symbole, and draw the standard caps symbole in symbole 
editor.
We have a option for inseart a standard symbols like res,caps,inductor,relay 
ect.,in standard 
toolbars.
while picking required symbol, that icon was hiding.So i am not able to use 
those tool bars.
Is there any way to use these standard discrete symbols in symbole ediotr?
Thank u
 
Regards
Felix Paul
 



Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now.


      
____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

Other related posts: