[PCB_FORUM] Re: clines can not be found.

Kevin--
   Do you mean ?
Try typing "skill axlClearSelSet" in your command window.
   For some reason that didn't work when I did that. But I did that
before upreving the ISR level so maybe that did have something to do
with the solution.

Thanks, Diane.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin McCowan
Sent: Wednesday, April 27, 2005 8:21 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: clines can not be found.

Hooray! Any fix is a good fix.
And that was suggested (see below).

Kevin

Dickoff, Diane J wrote:
> Kevin---I actually had tried this but it didn't work.
> 
> I ended up sending the board to Cadence and they got their copy to
work
> with a dbdoctor. But mine still didn't work(after everything I tried)
> This morning we found the solution. When allegro crashed on me it left
> my find filter for delete in a strange state. All I needed to do was
> turn everything off on the find filter form and then turn them back on
> for the delete command.
> Now I can delete!!
> 
> (I also uprev'd to a more current ISR level but not sure whether that
> was part of the solution or not)
> 
> Thanks, Diane Dickoff
> Intel Corporation
> Hillsboro, Oregon
> 
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin McCowan
> Sent: Wednesday, April 27, 2005 5:45 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: clines can not be found.
> 
> Diane,
> Try selecting all of the clines and vias and moving
> them 0 (ipick 0) in any direction if the previous idea
> doesn't work. If moving them allows you to select them
> this should work.
> 
> Kevin McCowan
> Sr. PCB Designer
> TSI Telsys
> 
> Dave Elder wrote:

Here

>>Hi Diane,
>>
>>I had a similar problem with a Skill routine.
>>It was solved by clearing the select set. This unsets the find bit.
>>Try typing "skill axlClearSelSet" in your command window.
>>
>>Cheers, Dave
>>
>>Dickoff, Diane J wrote:
>>
>>
>>> 
>>>
>>>I had a crash in my allegro. I ran dbdoctor, updated my drcs,  picked
> 
> 
>>>up all the traces and vias and moved 0,0, and rebooted by desktop.
> 
> But 
> 
>>>when I try to delete a via or cline it says there is no element to be
> 
> 
>>>found (and they are selected in the find menu). The only way I can
> 
> get 
> 
>>>it to see the cline is to move it (without stretching etch) and then 
>>>delete it---I can't get anything to delete a via.
>>>
>>> 
>>>
>>>Has anyone seen this before and/or do you have any suggestions on how
> 
> 
>>>to fix it?
>>>
>>> 
>>>
>>>Thanks, Diane Dickoff
>>>
>>>Intel Corporation
>>>
>>>Hillsboro, Oregon
>>>
>>> 
>>>
>>> 
>>>
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: