[PCB_FORUM] Re: clines can not be found.

Kevin---I actually had tried this but it didn't work.

I ended up sending the board to Cadence and they got their copy to work
with a dbdoctor. But mine still didn't work(after everything I tried)
This morning we found the solution. When allegro crashed on me it left
my find filter for delete in a strange state. All I needed to do was
turn everything off on the find filter form and then turn them back on
for the delete command.
Now I can delete!!

(I also uprev'd to a more current ISR level but not sure whether that
was part of the solution or not)

Thanks, Diane Dickoff
Intel Corporation
Hillsboro, Oregon

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin McCowan
Sent: Wednesday, April 27, 2005 5:45 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: clines can not be found.

Diane,
Try selecting all of the clines and vias and moving
them 0 (ipick 0) in any direction if the previous idea
doesn't work. If moving them allows you to select them
this should work.

Kevin McCowan
Sr. PCB Designer
TSI Telsys

Dave Elder wrote:
> Hi Diane,
> 
> I had a similar problem with a Skill routine.
> It was solved by clearing the select set. This unsets the find bit.
> Try typing "skill axlClearSelSet" in your command window.
> 
> Cheers, Dave
> 
> Dickoff, Diane J wrote:
> 
>>  
>>
>> I had a crash in my allegro. I ran dbdoctor, updated my drcs,  picked

>> up all the traces and vias and moved 0,0, and rebooted by desktop.
But 
>> when I try to delete a via or cline it says there is no element to be

>> found (and they are selected in the find menu). The only way I can
get 
>> it to see the cline is to move it (without stretching etch) and then 
>> delete it---I can't get anything to delete a via.
>>
>>  
>>
>> Has anyone seen this before and/or do you have any suggestions on how

>> to fix it?
>>
>>  
>>
>> Thanks, Diane Dickoff
>>
>> Intel Corporation
>>
>> Hillsboro, Oregon
>>
>>  
>>
>>  
>>
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: