[PCB_FORUM] Re: choices with schs

Hi Sam,
 
1st, I like to refer folks to the Allegro datasheet that gives the
differences
between the Base, L XL and GXL features.   here's the link
http://www.cadence.com/datasheets/7432_PCB_Designs_FINAL.pdf
 
also, Here is the link to the What's New in 16.0 doc on SourceLink
http://sourcelink.cadence.com/docs/files/Release_Info/Docs/landing/spb16
0/prodList.html
There are some notes there that also describe the differences between
products. 

Hope this helps, Best Regards,

John

John McMillan 
SPB Technical Relationship Manager 
Cadence Design Systems 
Phone: 800-268-6078 
Use SourceLink: http://sourcelink.cadence.com
<http://sourcelink.cadence.com/>  
Customer Support: 877-237-4911 
Web-based User Community http://www.cdnusers.org/ 


 

________________________________

        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
sjchar3@xxxxxxxxxxxx
        Sent: Friday, June 29, 2007 12:36 PM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] choices with schs
        
        
        
<http://pictures.aol.com/ap/singleImage.do?pid=de40mzf8cC-GdaDAI4SSjWva8
KBE0CYVKYNmv4xQp5Fd3Ig%3D> 
        View full size
        
        I've attach a jpg. I've never had to choose which sch tool to
use. they seem to open the same tool. Anyone know if these two are the
same tool?
        
        thanks
        Sam
        
        
________________________________

        Check Out the new free AIM(R) Mail
<http://pr.atwola.com/promoclk/100122638x1081283466x1074645346/aol?redir
=http%3A%2F%2Fwww%2Eaim%2Ecom%2Ffun%2Fmail%2F>  -- Unlimited storage and
industry-leading spam and email virus protection.

Other related posts: