We use CR for the ref des, and A & C for the pins. I think the ref des
being CR is fairly common.
________________________________
From: Gene Carman [mailto:gcarman@xxxxxxxxxxxxxxx]
Sent: Monday, October 25, 2004 4:18 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: cathode pin 1 or 2
CR as the designator... or even today some folks use D.
-----Original Message-----
From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx]
Sent: Monday, October 25, 2004 12:55 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: cathode pin 1 or 2
put me in for A (Anode) and K (Cathode)... I thought 'K'
was the official designator?
-----Original Message-----
From: westfeldt
[mailto:westfeldt_nbcd@xxxxxxxxx]
Sent: Monday, October 25, 2004 11:48 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] cathode pin 1 or 2
Just noticed that the PADS users group
overwhelmingly uses pin 1 for cathode. What's the vote on this list?
Patrick Westfeldt, Jr.
North Boulder Circuit Design
westfeldt_nbcd@xxxxxxxxx
720-406-0887
c 720-272-5822