[PCB_FORUM] Re: capture vs concept /autorouting ddr2 with allegro possible?

Specctra autorouter is completely capable of achieving the results you require. 
You do need to define the appropriate constrainsts within a .do file to control 
the router.

Dave
> 
> From: "Samuel Cais" <cais@xxxxxxxxxx>
> Date: 2006/06/21 Wed AM 10:40:32 CDT
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] capture vs concept /autorouting ddr2 with allegro 
> possible?
> 
> Hello group,
> 
>  
> 
> We are using project manager,concept 15.51-s010 and allegro 15.51 s035.
> 
> We'll  perhaps change concept for capture (orcad).
> 
> I don't know capture so i would like to know basicaly what are the
> advantages of each tool.
> 
>  
> 
> My 2nd question is for the ddr2.We are spending a lot of time adapting
> the length and I was wondering if the cadence autorouter is abable to
> route and adapt in length traces and if it is doing decent job?
> 
>  
> 
> Thank you
> 
>  
> 
> Samuel
> 
>  
> 
> 
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: