[PCB_FORUM] bus pin

I'm using capture 10.0. I have a bga and i would like to group a number of pins 
to gnd. Can i do this using bus pin?
For instance pins C3-C10 hook to gnd, that might be one pin.
pins d3-d10 another bus hooked to gnd. I tried to build a part using bus pin, 
Name Vssio[C3-C10] and pin number C3,C4,C5,C6..... Its seems i would have to 
make two parts one with gnd and vcc pins and put it on seperate pages.

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: