[PCB_FORUM] Re: available prefixes for reference designators

No worries, got the answer from source link.
Thanks anyway-


Martin G. Nolting
PCB Layout Engineer

LSI Logic Corporation, ESG
5400 Airport Blvd Suite 100
Boulder, CO 80301

303.381.4284 (phone)
martin.nolting@xxxxxxx<mailto:martin.nolting@xxxxxxx>

Enable. Enhance. Empower.

________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Nolting, Martin
Sent: Wednesday, January 20, 2010 1:50 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] available prefixes for reference designators

We are using more/different prefixes for our schematic symbols than what is 
available in the pull down menu.
Is there a way to modify the values that are in that pull down to reflect what 
we are really using.
I know we can type the prefix that we want into the open field, but I have 
engineers who are asking for them to be put into the pull down.
Thanks-
Martin G. Nolting
PCB Layout Engineer

LSI Logic Corporation, ESG
5400 Airport Blvd Suite 100
Boulder, CO 80301

303.381.4284 (phone)
martin.nolting@xxxxxxx<mailto:martin.nolting@xxxxxxx>

Enable. Enhance. Empower.

Other related posts: