Thanks for the response Jean-Charles. That makes sense as to why the "Dynamic fillets" box is grayed out. But then why am I getting auto fillets? Regards, Gary ----- Original Message ----- From: TEYSSIER Jean-Charles<mailto:jcteyssier@xxxxxxxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx> Sent: Tuesday, September 01, 2009 11:46 AM Subject: [PCB_FORUM] Re: auto glossing? Auto filleting works only with XL licence, not performance. Jean-Charles ------------------------------------------------------------------------------ De : icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] De la part de Gary MacIndoe Envoyé : mardi 1 septembre 2009 19:43 À : icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx> Objet : [PCB_FORUM] Re: auto glossing? Thanks for the response Jerry. I have the "Pad And T Connection Fillet" window for gloss parameters set up exactly as you do (same boxes checked or unchecked and same values in fields), but my "Dynamic fillets" near the bottom is grayed out. Hmmm... Regards, Gary ----- Original Message ----- From: Schwartz, Jerome<mailto:jschwa01@xxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx> Sent: Tuesday, September 01, 2009 11:27 AM Subject: [PCB_FORUM] Re: auto glossing? Gary, It appears that you have dynamic fillets turned on. Go to route/gloss parameters and select the pad and T fillet connection option. Then deselect dynamic fillets. Jerry ---------------------------------------------------------------------------- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary MacIndoe Sent: Tuesday, September 01, 2009 1:17 PM To: icu-pcb-forum Subject: [PCB_FORUM] auto glossing? Hey guys, I'm running 16.2 "Allegro PCB Performance option L" on Windows XP Pro. I haven't been using 16.2 for long, but all of a sudden I'm seeing what looks like some kind of auto glossing: I have never run gloss (I leave it up to the fab house to add it if necessary), nor have I seen this behavior in 15.7. I've poked around in User Preferences and can't find where to turn it off. Anyone know how to stop this glossing from happening? TIA Regards, Gary