[PCB_FORUM] Re: antenna vias

As per me Dangling vias orphan vias are called as Antenna Vias in case
of HS boards. If you have SPB16.2 then there is a feature of Removing
all the unconnected vias.
 
Mashak

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Friday, June 12, 2009 2:11 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: antenna vias


Report methodology:
  - Dangling lines have at least one end not connected.
  - Dangling vias have one or no connection
      - Plus are not a testvia or a thieving via.
  - Antenna vias do not have connections on their start and end layers.
      - Plus they are not a thieving vias.
      - Optionally, VOLTAGE nets, testvias and through vias can be
suppressed with
        the environment variable report_antennavia.
      - Section may be suppressed by variable report_noantennavia.
  - In all cases output is suppressed if an object has the OK_DANGLE
    property or is not part of the current partition.
 

 

 

Dave Seymour

Ixia

919.267.4840

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
sjchar3@xxxxxxxxxxxx
Sent: Thursday, June 11, 2009 4:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] antenna vias

 

group:

What is a antenna via? The "dangling line report" flags this.

Thanks

Sam

 

________________________________

Make your summer sizzle with fast and easy recipes
<http://food.aol.com/grilling?ncid=emlcntusfood00000003>  for the grill.

Other related posts: