[PCB_FORUM] Re: antenna vias

Report methodology:

  - Dangling lines have at least one end not connected.

  - Dangling vias have one or no connection

      - Plus are not a testvia or a thieving via.

  - Antenna vias do not have connections on their start and end layers.

      - Plus they are not a thieving vias.

      - Optionally, VOLTAGE nets, testvias and through vias can be suppressed 
with

        the environment variable report_antennavia.

      - Section may be suppressed by variable report_noantennavia.

  - In all cases output is suppressed if an object has the OK_DANGLE

    property or is not part of the current partition.




Dave Seymour
Ixia
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Thursday, June 11, 2009 4:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] antenna vias

group:

What is a antenna via? The "dangling line report" flags this.

Thanks

Sam

________________________________
Make your summer sizzle with fast and easy 
recipes<http://food.aol.com/grilling?ncid=emlcntusfood00000003> for the grill.

Other related posts: