[PCB_FORUM] Re: allegro.ilinit

Sam,
        If your running the "Studio" version of Allegro, the Skill
        commands cannot be entered in the command window.


        Open your "Allegro.ilinit" file and look for any line that
        contains "setSkillPath". If one is present, add
"c:\pcbenv\skill"
        to the path.

        If setSkillPath is not present in your allegro.ilinit file, add
        the following line to the file:

        (setSkillPath (cons "c:\\pcbenv\\skill" (getSkillPath) ) ) 

        
        This command will add "c:\pcbenv\skill" to the beginning of
        you current search path.

Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958


-----Original Message-----
From: SjChar3@xxxxxxxxxxxx [mailto:SjChar3@xxxxxxxxxxxx] 
Sent: April 27, 2005 5:27 PM
To: mike@xxxxxxxxxxxxx
Subject: 



   Check to see if your Skill search path is looking the 
   directory "c:\pcbenv\skill". In the command prompt
   window type:

       enter -> skill
       enter -> (getSkillPath)

I typed in Skill in Command window and i get command not found


   If the directory "c:\pcbenv\skill" is not part of your 
   Skill search path, add it by using the following commands:
                                                  
       enter -> skill
       enter -> setSkillPath '("." "c:\pcbenv\skill")) 
       enter -> (getSkillPath)
I used copy-paste in for above command in command window and i get
"unmatched quote".



__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at
http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: