[PCB_FORUM] Re: allegro crash when routing diff pairs

In a previous level, I'm thinking one of the 14.2 versions, this same
error would appear during plot operations if you would switch your
plotter output on the fly. If Cadence approachs this in the same way as
they approached the plotter problem, they will insist that it is a
windows issue if you are the first to report it. Don't be shy about
escalating this problem all the way up the chain, if you don't get a
satisfactory fix or work around to solve this.
ps. the work around for the plotter problem was to back out, delete the
allegro.ini file in the same directory as the env file, go back into
allegro, change the setup and plot. 
Good Luck

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Samuel Cais
Sent: Wednesday, May 17, 2006 4:12 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] allegro crash when routing diff pairs



 

 

 

When I'm routing some diff pairs I'm having this message.

It's really annoying.Do you know any fixes?

I'm running allegro 15.5 p008 (v15-5-81j) (7/13/2005) i86

Thanks

 

Samuel

 

 

 

Samuel CAIS                                Interphase Corporation

CAD PCB Designer                           2901 N. Dallas Parkway #200

cais@xxxxxxxxxx                            Plano, TX 75093

214.654.5337                               www.Interphase.com

JPEG image

Other related posts: