[PCB_FORUM] aligning components

Hi Folks,

 Where I can find option for aligning the multiple number of components
either in same X-axis or Y-axis while placement in  15.2 editor.

perhaps someone could refresh my memory on this :-)

 

 

Thanks with Regards,

Suresh

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
rjbzxr@xxxxxxxxxxxx
Sent: Wednesday, October 04, 2006 5:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Rename schematic cell in Allegro Design Entry
HDL

 

The only way I can think of is to use the subdesign option in the
packager..

 

you have to use the property SUBDESIGN_SUFFIX. 

So if the SUBDESIGN_SUFFIX is set to ROM, then you can get R1_ROM,
R2_ROM etc.

 



-----Original Message-----
From: patrick.escher@xxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Wed, 4 Oct 2006 11:48 AM
Subject: [PCB_FORUM] Re: Rename schematic cell in Allegro Design Entry
HDL

still looking for a solution :)

2006/9/28, Patrick Escher <patrick.escher@xxxxxxxxx
<javascript:parent.ComposeTo('patrick.escher@xxxxxxxxx',%20'');> >: 

Hello , 

I am trying to find a way to rename a cell in Allegro Design Entry HDL
and updating all the references.
For example, I have a design root dsp which instantiates the cell rom
and schematic.
I now want to rename the cell rom to rom_1 and update all the
references. 

I did'nt find any hint in the documentation ( besides cdscopyshell,
which does no run on Windows), so I suppose that this can only be done
using skill.
So I would loop through the hierarchies of the schematics and
update/replace the cell rom with rom_1. That should work, hence it is
some effort. 
But what about e.g. the variant file or other files like the opf etc.
this also needs to be updated manually, so this will become a pain :(

Does anybody know an already existing solution on how to do this ?

Thanks in Advance

Patrick

 

________________________________

size=2 width="100%" align=center> 

Check Out the new free AIM(R) Mail
<http://pr.atwola.com/promoclk/100122638x1081283466x1074645346/aol?redir
=http%3A%2F%2Fwww%2Eaim%2Ecom%2Ffun%2Fmail%2F>  -- 2 GB of storage and
industry-leading spam and email virus protection.



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended 
for the named recipient(s) only. 
It shall not attach any liability on the originator or HCL or its affiliates. 
Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the 
opinions of HCL or its affiliates. 
Any form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is 
strictly prohibited. If you have 
received this email in error please delete it and notify the sender 
immediately. Before opening any mail and 
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------

Other related posts: