[PCB_FORUM] Re: a design reuse question

Hi Mike,

I don't think that's the case, because the .mdd file was just re-created before I called it into the up level design.

Things really make me unhappy are each time I re-packagge, re-create module, and then re-use the module, there are always two parts missing from placement, but the parts changed from one trial to another!

I need more help. Thanks.

Best regards,

Rock

On Tue, 22 Nov 2005, gnieski, mike wrote:

        Sounds like a disconnect between your schematic and module.
        Possibly they are not in sync. Parts were removed on the
        schematic and the .mdd was not updated?

        Mike Gnieski
        EMC Corp.


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Rock Shi
Sent: Tuesday, November 22, 2005 12:33 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] a design reuse question

Hi,

When I place a module for a subdesign into the layout for the top level
design, some parts of the module will not be placed. Can anyone tell me
why this could happen? I am using Allegro PCB15.2. Thanks.

Best regards,

Rock
-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: