[PCB_FORUM] Z Axis Delay Question
- From: seiji arimitsu <arimitsus@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 10 Dec 2008 12:21:56 -0800
Hello All,
I was wondering if anyone could help me solve this problem.
I am using the Z Axis Delay to do the length matching for a board. One end is
connected to a BGA by Via on Pad L1-L7. The other end is connected to a part
that has a through hole connecting top and bottom pad of a footprint. The
layer count is 28 which is making the distance from L7 to top and bottom to be
different. I was wondering if there was a way to specify which length to use.
Either L7-L1 or L7-L28. (Currently it will only give me the distance for the
side the component is placed on.
If anyone have a solution for this I would appreciate it if you could advise me
how to solve this problem.
Thank you all in advance.
Seiji
Other related posts:
- » [PCB_FORUM] Z Axis Delay Question - seiji arimitsu