[PCB_FORUM] Re: ViewDraw Component Properties

Michael,

Thank you for your patience and kindness.

Appreciatively,

Richard E Marion


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Michael.Catrambone@xxxxxxxxxx
Sent: Friday, October 21, 2005 8:33 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: ViewDraw Component Properties

Here is my reply / attachment.
---------------------- Forwarded by Michael Catrambone/UTStarcom on
10/21/2005 07:32 AM ---------------------------

Michael Catrambone
10/19/2005 05:08 PM



To:    icu-pcb-forum@xxxxxxxxxxxxx
cc:
Subject:    Re: [PCB_FORUM] ViewDraw Component Properties  (Document link:
       Michael Catrambone)
                                                                    
                                                                    
                                                                    
                                                                    


Richard,

There is a file which is generated during the Viewdraw netlist compile that
contains
schematic page information. ....

I started to type a response and realized that I had the process outlined
in a
presentation that I gave at the 2001 ICU Conference.  Basically, you assign
properties to the function designators then hilite the different schematic
pages
using these properties.

Attached to this email is a ZIP File which contains a scaled down version
of the
presentation which just covers the schematic page property process. Let me
know
if you don't get the presentation so I can send it directly to your email
address.

As far as the association of the "Filter Caps with their related IC".. that
will take
must more work that it is worth.   I believe Cadence has something in place
to
accomplish this but you will need to use their front end tools.  It is
probably best
to use ROOM properties on the Viewdraw side and drive them thru the 3rd
party
netlist them place the components by Room.


Hope this helps,
Michael Catrambone
UTStarcom, Inc.

(See attached file: Viewdraw_SchPg_to_Rooms.zip)








"Richard E Marion" <ricmar@xxxxxxxxxxx>@freelists.org on 10/19/2005
03:24:14 PM

Please respond to icu-pcb-forum@xxxxxxxxxxxxx

Sent by:    icu-pcb-forum-bounce@xxxxxxxxxxxxx


To:    <icu-pcb-forum@xxxxxxxxxxxxx>
cc:
Subject:    [PCB_FORUM] ViewDraw Component Properties


Dear Forum,



My Customer employs ViewDraw (very old Rev) Third-Party Schematic Capture.



I end up with Netlist, Device Files, and a .pdf Schematic.



Are there any Component Properties that will come across and allow me to
Highlight by Schematic Page?



An extra bonus would be the capability to associate Filter Caps with their
Related IC's.



I already know I'm Crazy, so don't be shy!



Thank You,



Richard E Marion

169 Little Mill Road Unit 2

Sandown NH 03873-2554

HOME: 603-887-2266

CELL: 603-247-1610

FAX : 603-887-2936






-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: