[PCB_FORUM] Re: Via inside SMD discrete..

Hi Jeff,

> This subject has been a hotly debated topic among our engineers here
> and your original posting re-ignited the debate.

I'm just happy to see ANY decoupling caps on a board...  I see lots of
boards that have severely insufficient decoupling.  It used to be the #1
thing that had to get fixed when we were asked to debug some other companies
boards.

With respect to the subject, whether one gives .2uh better specs or not, I
have not seen any studies that show the actual significance of either
methodology.  My experience is that both work sufficiently well, at least in
the circumstances I have encountered...and I go up in the low GHz range with
some of my designs.

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: