[PCB_FORUM] Re: Very interesting router...

Fanout is a local process; fanout rules are not obeyed during active routing.

Fanout is important if it serves a purpose to be preserved (like protecting the BGA dogbones).

Otherwise, the power and ground lengths are controlled DYNAMICALLY with max_stagger rule. No rule - then no control.

Regards,

David


At 04:49 PM 5/23/2006, you wrote:
Why does router create unreasonably long and strangely twisted fanouts for ground and power signals?

Thanks,
Gennadiy
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


David Price

davidp@xxxxxxxxxxxxxx

866.586.9352    Phone   Toll-Free
866-422.5312    Fax     Toll-Free

http://www.eAutoroute.com

B o r n  T o  R o u t e

SPECCTRA Autorouting, SPECCTRA Onsite and Seminar Classes, MakeDO E, MakeDO and AutoTools

DFM
351 Pleasant St. #275
Northampton, MA 01060



-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: