[PCB_FORUM] Re: Version upgrade to v16 - startup warning

Hi Richard,
 
There still is the variable list but it's embedded in the env editor. 
In 15.x Setup - user preferences. If you pick the info button on the
bottom it brings up the entire list.

Regards and happy holidays everyone!

Barbara

On Tue, 2007-12-11 at 15:43, richard moffat wrote:
> Hello Barbara
> 
> I had a suspicion you would reply!  In the pcbenv ilinit file, works a treat.
> 
> I remember there was somewhere a long list of such variables.  Is one still 
> around?
> 
> 
> Many thanks.
> Richard
> 
> >>> Barbara Seeger <blm@xxxxxxxxxxx> 12/12/2007 3:04 a.m. >>>
> Hi,
> 
> The syntax you want in a script for the variable is:
> 
> set noconfirm_uprev 1
> 
> This should work for both questions. 
> 
> Regards,
> 
> Barbara Seeger - Cadence
> 
> 
> On Tue, 2007-12-11 at 06:56, William Gerner - Sun Microsystems wrote:
> > Hi Richard,
> > 
> > I was working the same issue over the past couple of days.  One of the 
> > following
> > may work for you:
> > 
> > - set noconfirm_uprev = true  (seems to work well if in your env file 
> > though I've had
> >                                                     problems when I try to 
> > put it in an 
> > Allegro script)
> > 
> > - You can also set this as environment variable within a program (i.e. 
> > perl), though
> >    finding the correct syntax can be fun.
> > 
> > Note that I've asked Cadence to look into why "set noconfirm_uprev = true" 
> > works
> > when I execute it within an Allegro session but not when I run it from a 
> > script in
> > no-graphics mode.
> > 
> > Regards,
> > 
> > -Bill
> > 
> > richard moffat wrote:
> > > Hello all
> > > 
> > > I'm trying to open pre-v16  Allegro files in no-graphics mode using v16.
> > > 
> > > Unfortunately, the "Warning - This database was saved by an earlier 
> > > release..." pops up.
> > > 
> > > Can this be disabled for the no-graphics mode?  Otherwise, it just hangs.
> > > 
> > > Cheers,
> > > Richard
> > > 
> > >   
> > > __________________________
> > > Richard Moffat
> > > PCB CAD Team Leader
> > > Allied Telesis Labs
> > > ph. +64 (3) 3393000
> > > richard.moffat@xxxxxxxxxxxxxxxxxxx 
> > > 
> > > NOTICE: This message contains privileged and confidential
> > > information intended only for the use of the addressee
> > > named above. If you are not the intended recipient of
> > > this message you are hereby notified that you must not
> > > disseminate, copy or take any action in reliance on it.
> > > If you have received this message in error please
> > > notify Allied Telesis Labs Ltd immediately.
> > > Any views expressed in this message are those of the
> > > individual sender, except where the sender has the
> > > authority to issue and specifically states them to
> > > be the views of Allied Telesis Labs.
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe: 
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
> > > with a subject of subscribe or unsubscribe
> > > 
> > > To view the archives of this list go to 
> > > http://www.freelists.org/archives/icu-pcb-forum/
> > > 
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
> > > -----------------------------------------------------------
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
> > with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list go to 
> > http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
> > -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
> -----------------------------------------------------------
> 
> NOTICE: This message contains privileged and confidential
> information intended only for the use of the addressee
> named above. If you are not the intended recipient of
> this message you are hereby notified that you must not
> disseminate, copy or take any action in reliance on it.
> If you have received this message in error please
> notify Allied Telesis Labs Ltd immediately.
> Any views expressed in this message are those of the
> individual sender, except where the sender has the
> authority to issue and specifically states them to
> be the views of Allied Telesis Labs.
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: