[PCB_FORUM] Re: Version upgrade to v16 - startup warning

Barbara to the rescue as always !

William Gerner - Sun Microsystems <William.Gerner@xxxxxxx> wrote: Thanks, 
Barbara!

This solved the problem I was having also.

Regards,

-Bill

Barbara Seeger wrote:
> Hi,
> 
> The syntax you want in a script for the variable is:
> 
> set noconfirm_uprev 1
> 
> This should work for both questions. 
> 
> Regards,
> 
> Barbara Seeger - Cadence
> 
> 
> On Tue, 2007-12-11 at 06:56, William Gerner - Sun Microsystems wrote:
>> Hi Richard,
>>
>> I was working the same issue over the past couple of days.  One of the 
>> following
>> may work for you:
>>
>> - set noconfirm_uprev = true  (seems to work well if in your env file though 
>> I've had
>>                                                     problems when I try to 
>> put it in an 
>> Allegro script)
>>
>> - You can also set this as environment variable within a program (i.e. 
>> perl), though
>>    finding the correct syntax can be fun.
>>
>> Note that I've asked Cadence to look into why "set noconfirm_uprev = true" 
>> works
>> when I execute it within an Allegro session but not when I run it from a 
>> script in
>> no-graphics mode.
>>
>> Regards,
>>
>> -Bill
>>
>> richard moffat wrote:
>>> Hello all
>>>
>>> I'm trying to open pre-v16  Allegro files in no-graphics mode using v16.
>>>
>>> Unfortunately, the "Warning - This database was saved by an earlier 
>>> release..." pops up.
>>>
>>> Can this be disabled for the no-graphics mode?  Otherwise, it just hangs.
>>>
>>> Cheers,
>>> Richard
>>>
>>>   
>>> __________________________
>>> Richard Moffat
>>> PCB CAD Team Leader
>>> Allied Telesis Labs
>>> ph. +64 (3) 3393000
>>> richard.moffat@xxxxxxxxxxxxxxxxxxx
>>>
>>> NOTICE: This message contains privileged and confidential
>>> information intended only for the use of the addressee
>>> named above. If you are not the intended recipient of
>>> this message you are hereby notified that you must not
>>> disseminate, copy or take any action in reliance on it.
>>> If you have received this message in error please
>>> notify Allied Telesis Labs Ltd immediately.
>>> Any views expressed in this message are those of the
>>> individual sender, except where the sender has the
>>> authority to issue and specifically states them to
>>> be the views of Allied Telesis Labs.
>>> -----------------------------------------------------------
>>> To subscribe/unsubscribe: 
>>> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>>> with a subject of subscribe or unsubscribe
>>>
>>> To view the archives of this list go to 
>>> http://www.freelists.org/archives/icu-pcb-forum/
>>>
>>> Problems or Questions:
>>> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>> -----------------------------------------------------------
>> -----------------------------------------------------------
>> To subscribe/unsubscribe: 
>> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>> with a subject of subscribe or unsubscribe
>>
>> To view the archives of this list go to 
>> http://www.freelists.org/archives/icu-pcb-forum/
>>
>> Problems or Questions:
>> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: