[PCB_FORUM] Re: Variant BOM / Assembly dwg for multi model board


At one time I had found a down-load able PDF at EMA on this topic. http://support.ema-eda.com

Jim

At 01:10 PM 10/26/2005 -0700, you wrote: 
Mark
I use it a lot for no load list. I find it quite complicated to setup if
you have multiple variants and Noloads. Some one may have an easer way
but here is what I create by hand.
        Common parts                    All parts get moved from here
        LoadedCommonParts                       All Common loaded parts
(Present)
        Varient 1 BOM
                LoadedVariant1          Loaded Non Common parts
(Present)
                NoloadedVariant1                Not Loaded      (Do not
install)
        NotStuffedCommonParts           Copy of LoadedCommonParts (Do
not                                                     install)
        NotStuffed 1 BOM
                NotStuffed1                     No Load BOM Non common
parts (Present)
                Stuffed1                        Loaded BOM Non common
parts (Do not                                           install)

This carries on for each variant.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Wednesday, October 26, 2005 12:31 PM
To: Cadence User Group
Subject: [PCB_FORUM] Variant BOM / Assembly dwg for multi model board

Is there anyone out there that uses the Variant BOM to report different
"Do not install" and "different value"  Bom's for a multi model  design?
We are using V15.1.
Any feedback would be appreciated.

Thank you,
Mark


________________________________________________________________________
_____
Scanned by IBM Email Security Management Services powered by
MessageLabs. For more information please visit http://www.ers.ibm.com
________________________________________________________________________
_____
-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------




-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------


Jim Goshorn
MCL, Inc
501 S Woodcreek Rd
Bolingbrook, IL 60440
630-771-7205

Other related posts: