[PCB_FORUM] Re: Uprev Problems

Base version of 16.2 has a known issue, I had the same problem and had to
revert to 16.0 to uprev.

 

I believe that it's mentioned as being fixed in the hotfix, but I have not
actually tried to uprev since installing.

 

Get the latest hotfix and let us know if it works !

 

Dave Schaefer

dave.schaefer@xxxxxxx

 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
ameehan@xxxxxxxxxxxxxx
Sent: Thursday, February 12, 2009 6:13 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Uprev Problems

 

I'm currently running Allegro 16.2. We have several old .brds at the 14.x
level. When I try to open them, it prompts me to run dbdoctor. It seems to
go through the uprev steps, but ends with errors:

Performing UPREV on the database - C:/pcb-history/test.brd

Performing dbdoctor14 to bring DB up to REV14

C:\pcb-history\>echo off ERROR: Revision to REV14 found errors.

Performing dbdoctor15 to bring DB up to REV15

C:\pcb-history>echo off ERROR: Revision to REV15 found errors.

ERROR: Uprev failed! 

I've logged an SR, but am wondering if anyone else has run into this problem
and has a quick solution. Thanks for any info!

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list
go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or
Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: