[PCB_FORUM] Re: Uprev Designs 13.6 to 15.5

Thanks George,
Anyone from Cadence know if this (only going back to 13.6) on pc will be
fixed in the future?
 
Steve

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Wednesday, November 02, 2005 2:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Uprev Designs 13.6 to 15.5


Steve:
 
We  have boards that go back to version 8 (maybe some earlier).  The 3
version limit is for maintenance support of the software and has nothing
to do with converting older versions to newer.  Uprev should continue to
bring older versions into the latest version.
 
The only proviso is that we have to use UNIX to uprev some of the
earlier boards as the PC uprev will only work back to 13 or so.
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, Engineering Design Services
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/> 

It's my opinion, not Tektronix' 

        -----Original Message-----
        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani,
Stephen
        Sent: Wednesday, November 02, 2005 09:13
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Re: Uprev Designs 13.6 to 15.5
        
        
        Thanks George,
         
        I thought that the uprev was only supported back 3 revisions?
That's why I was starting this effort before Rev 16.
        is anyone clear on this? Is there a 3 year support rule?
         
        Steve

  _____  

        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
        Sent: Wednesday, November 02, 2005 11:59 AM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Re: Uprev Designs 13.6 to 15.5
        
        
        Stephen:
         
        We have found it more cost effective to delay uprev until it is
actually needed.
         
         
        
        -- 
        George Patrick
        Tektronix, Inc.
        Central Engineering, Engineering Design Services
        P.O. Box 500, M/S 39-512
        Beaverton, OR 97077-0001
        * 503-627-5272 (voice)     * 503-627-5587 (fax)
        http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/> 

        It's my opinion, not Tektronix' 

                -----Original Message-----
                From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani,
Stephen
                Sent: Wednesday, November 02, 2005 05:44
                To: icu-pcb-forum@xxxxxxxxxxxxx
                Subject: [PCB_FORUM] Uprev Designs 13.6 to 15.5
                
                
                Hello,
                 
                I will be taking on the task of up-reving all designs at
our company from 13.6, 14.x, 15.x to current 15.5
                 
                I would like to know if anyone has done this in the past
and if there is something I need to look out for. 
                I do understand that the rules have changed from 13.6 to
14.x to 15.x and the way we decided handle that is to just up-rev
everything and as we respin our designs we will update the rules. Is
this a preferred process?
                 
                Thanks,
                Steve
                 
                
                Stephen Mariani
                Mercury Computer Systems, Inc.
                199 Riverneck Road
                Chelmsford, MA 01824
                Phone: 978-967-1855
                Cell Phone: 978-761-4101
                Fax: 978-244-0520
                Email: mailto:smariani@xxxxxx
<blocked::mailto:smariani@xxxxxx>

Other related posts: