[PCB_FORUM] Unssuported pads and B/B vias

All,

I've been reading the earlier discussions about routing and outputting
   unsupported pads on designs. I have been doing this as a matter of course
   for years, but today I had a new twist added to the problem based on a
question from
   a new pcb fab vendor that we are having boards quoted by.

Typically, I ask the artwork generation parameters to "Suppress unconnected
pads"
   on all my inner layers and have never had any problems from the vendors.

However, it seems that during all this time, the tool has been omitting the
entry/exit
   padstacks from blind and buried vias (if the entry/exit falls on on inner
layer)
   as well as my intended targets of non-routed-to vias.
   My current vendor has simply been dealing with the issue and not stopping
to flag the problem.

Does anyone have any thoughts on how to keep extry/exit via pads but
continue to surpress the
   truely unconnected pads?

Thanks,

Rob Blomstrom, Senior PCB Designer
rob@xxxxxxxxxxxxx
http://blomstrom.biz/rob

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: