[PCB_FORUM] Re: Translating Protel to Allegro PCB file?

Hi Mike,

We'll try that and see how that works!  Thanks!

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Mike Wilson
> Sent: Wednesday, June 22, 2005 4:10 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Translating Protel to Allegro PCB file?
> 
> 
> Save it as a PCAD database ( PDIF ). Then import it into Allegro 
> as a PCad 
> database
> ----- Original Message ----- 
> From: "Austin Franklin" <austin@xxxxxxxxxxxx>
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Sent: Wednesday, June 22, 2005 3:01 PM
> Subject: [PCB_FORUM] Translating Protel to Allegro PCB file?
> 
> 
> > Hi,
> >
> > Does anyone have any suggestions on methodologies for 
> translating a Protel
> > PCB file to an Allegro file?
> >
> > Regards,
> >
> > Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: