[PCB_FORUM] Re: Tooling holes

Hi all

We've had these requests when the boards have no panel breakoffs.  

We stipulate they detail exactly where they are going to add them, and the 
build does not continue without our permission.  It's always worked well.

Cheers,
Richard

__________________________
Richard Moffat
PCB Specialist Engineer
Allied Telesis Labs
ph. +64 (3) 3393000
richard.moffat@xxxxxxxxxxxxxxxxxxx


>>> "Austin Franklin" <allegrolist@xxxxxxxxxxxx> 25/03/2009 8:53 a.m. >>>
Hi Frank,

> Actually Bill they do use the on-board .125 tooling holes In Fact they
> hope the customer provides
> them. If not they may ask if they can insert a couple.

I've never had a vendor ask if they can insert holes into my boards...that
could be really dangerous for them to do IMO.

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: