[PCB_FORUM] Re: Too many text sizes

Hello Douglas,
 
Please use, SETUP-TEXT SIZES- COMPACT option, automatically allegro will
purge the unused text sizes.
 
Thanks
Murali
 
-----Original Message-----
From: Douglas Stanley [mailto:dstanley@xxxxxxxxxxxx] 
Sent: Monday, November 22, 2004 10:16 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Too many text sizes
 
All,
 
    I've got a problem with one of my boards. Upon reading in the netlist
and doing a quickplace, I get three parts that won't place. After wading
through the cryptic messages and trying several things, I came to the
conclusion that is it a text block issue. 
    The board I'm importing the netlist into has 64 different text blocks
defined. Allegro won't allow any more than 64. The new parts I'm trying to
add have different sizes embedded in them. Since Allegro won't allow any
more than 64, it won't read these symbols in.
    I know the board isn't using 64 different text sizes, so my question is:
How can I purge unused text definitions? This would allow for new text sizes
to be imported. Has anyone dealt with this issue? 
 
 
Thanks,
 
Doug
 
 
Douglas G. Stanley 
Broadcom Corporation - www.broadcom.com 
(949) 926-5889 - voice 
dstanley@xxxxxxxxxxxx

Other related posts: