[PCB_FORUM] Re: Toggle command

Thanks for the confirmation Barbara.
This what I'm doing now. I was just being lazy and didn't want to move my
finger to another key :)

Thanks,
Joe

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara Seeger
Sent: Thursday, January 24, 2008 11:04 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Toggle command


Joe,

You won't be able to do a toggle for the the max 45 length with aliases,
but you could set up 2 temporary commands like this:

 funckey F9 "setwindow form.mini;FORM mini max_45_len 9999.00;setwindow
pcb"
 funckey F8 "setwindow form.mini;FORM mini max_45_len 10.00;setwindow
pcb"

Then in slide , these will set the value you wanted. With any alias or
funckey command, you cam look at the journal file and find a command but
if it's form related you need the supporting records too.

Regards,
Barbara Seeger - Cadence Design Systems - 978-262-6578





On Thu, 2008-01-24 at 13:43, Joe.witten wrote:
> I'm in Ver15.7 trying to set up a funckey to toggle between slide with a
max
> 45 length of 10 or 99999.  I can't seem to get toggle to work.  I am
> replying .scr's that achieve this now, but it would be handy to hit F8 and
> toggle between 10 and 99999.  Can this be done at the command line?
> 
> Thanks,
> Joe
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: