Hi All: When Orcad went to windows, they bought NeuroRoute from Gene Marsh in '96? Or it was licensed to Orcad and Protel bought it. Gene did good. That went into Orcad Layout, I think?. Is any of that NeuroRoute code still in any Orcad/Cadence products? tr :) -----Original Message----- From: Austin Franklin [mailto:austin@xxxxxxxxxxxx] Sent: Friday, July 08, 2005 11:53 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: The router... IMO, the interactive router in Allegro works very well. Differential pairs work great. There are different modes for hug preferred, shove etc. I don't know all the intricacies of all of them yet, but this interactive router is my preferred way of routing a board. It gives you a real time report of DPTol and length rules. I have not compared it to the Specctra interactive router, but perhaps a combination of the two would be best. Regards, Austin > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of > george.h.patrick@xxxxxxxxxxxxxx > Sent: Friday, July 08, 2005 11:42 AM > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: The router... > > > > I think that's the router Tom was talking about :) > > -- > George Patrick > Tektronix, Inc. > Central Engineering, PCB Design Group > P.O. Box 500, M/S 39-512 > Beaverton, OR 97077-0001 > Phone: 503-627-5272 Fax: 503-627-5587 > http://www.tektronix.com http://www.pcb-designer.com > > It's my opinion, not Tektronix' > > > > -----Original Message----- > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin > Sent: Friday, July 08, 2005 08:39 > To: icu-pcb-forum@xxxxxxxxxxxxx > Subject: [PCB_FORUM] Re: The router... > > > Hi George, > > > > The router that is built into Allegro... > > > > And it's not really "built-in" unless you pay the licensing for it > > (what do they call it now, 610?)... > > The interactive router in Allegro is at least in the Performance > version of > the 200 series tools. Is that the router you are talking about? > > Regards, > > Austin ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- This message and any file transmitted with it may contain confidential information and is exempt from disclosure under applicable law. The information contained in this message and any file transmitted with it is transmitted in this form based on a reasonable expectation of privacy. Any disclosure, distribution, copying or use of the information by anyone other than the intended recipient, regardless of address or routing, is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. Personal messages express views solely of the sender and are not attributable to Biodex Medical Systems, Inc. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------