[PCB_FORUM] Re: Text Blocks

Whoa, you are not "changing the size," you are reassigning the text to a new 
text block with different parameters.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Dave Seymour
Sent: Friday, September 23, 2005 9:16 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Text Blocks


Bob,

You can change the size of just one text location.

Edit --> Change, Set the find filter to text only.
Options Tab, set the text block to size 4 or to what ever you like.

Hope this helps.

dave


Bob McCreight wrote:

> Is it just me or does anyone else agree that the Text Block method 
> used by Allegro is ....
>  
> Would it not be much easier to just double click on a text string and 
> then enter appropriate values in a dialogue box for just that piece of 
> text?
>  
> What (if any) advantage is there to the Text Block method? Who came up 
> with this?
>  
> Case in point, I have a component with the Ref Des set as Text Block # 
> 3 which by default has the height set at 38. There is plenty of room 
> on the board so I would like to change the height to something like 
> 90. However, if I change Text Block # 3 to that value I may end up 
> messing with some other text elsewhere in my drawing, like say the 
> Tolerances in my Title Block. Why can't I just change that one Ref Des 
> by itself? 
>  
> OK, if I have to live with this scheme why can't I change the Text 
> Block # on the fly? For example, same symbol as above but rather than 
> go to Setup > Text Blocks and revise # 3 to a height of 90 how do I 
> change the Ref Des to say Text Block # 9? One way would be to revise 
> the .dra file, generate new symbol and device files, then replace the 
> comp in my layout. That is a lot of effort for a simple task. Why 
> not double click on that Ref Des and do a quick change?
>  
> Arrrrggghhhh.... just a bit of Friday morning venting :-}
>

-- 
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560

Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx


-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: