[PCB_FORUM] Re: Technology Selector ?

Hi Mike,

I got your voicemail.  I was in contact with Mike on Friday and sent him
the materials.

We developed the Technology Selector internally to fill what we saw as a
need in the tool and it is
not available in Allegro.  We hoped to draw attention to the issue and
work with Cadence to make this
standard functionality in the tool.  

Thanks,

Ed Lutz
Motorola Engineering Tools and Solutions
 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Michael
Catrambone
Sent: Friday, April 11, 2008 4:50 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Technology Selector ?
Importance: High

Mike,

Ed actually presented a paper at CDNLive! 2006 "Targeting Footprint
Selection by Technology in the Allegro PCB Editor" that talked about
add-on tools to Allegro that was created by his group, I don't think
that are part of the standard tool.  Ed is still a member of the forum
so he should have seen your post but maybe he is out of the office or
busy today.  I'll drop him a voicemail.

Both his paper and presentation are available for download on
CDNUsers.org http://www.cdnusers.org under the top menu CDNLive! >
Silicon Valley 2006 Proceedings. Once you get to the main Silicon Valley
2006 Proceedings page just click the "SPB Co-Design tab" and scroll down
to " Session 6.4: Targeting footprint selection by technology in the
Allegro PCB Editor"

Hope this helps,
Michael Catrambone
UTStarcom, Inc.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
gnieski_mike@xxxxxxx
Sent: Friday, April 11, 2008 6:52 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Technology Selector ?

        I stumbled across an article by Ed Lutz of Motorola (as of 2006)
who mentions
        a part of the tool that can be invoked via Import - Logic called
Technology Selector.
        This tool seems pretty interesting, problem is that I cannot
find it. Is this part of
        a certain tool set within Allegro? Does anyone have any info on
where this is found?
        I tried emailing Ed but as of this morning have had no luck.

        thanks,
        Mike

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: