[PCB_FORUM] Re: Syntax error in 15.5 router

Hi Gennadiy:

  I ran some 15.5 tests:

# Allegro PCB Router V15.5 made  at

  exported .dsn from Allegro using file > export> router
  Stated Specctra reading that .dsn
  executed the smart_route command both from the Specctra command line and
from the autoroute menu of specctra. Both run fine.
Results.
1. command window
smart_route
# Smart Route: This board is already 82.55% completed.
# Using modified smart_route algorithm.
# Smart Route: Executing 50 route passes.
# Current time = Mon Oct 17 13:18:32 2005
#
#    VIA       TOP        L3_V        L5_H        L8_H       L10_V
BOTTOM
#
#    TOP  ----------  C20P10_1MM  C20P10_1MM  C20P10_1MM  C20P10_1MM
C20P10_1MM
#   L3_V  C20P10_1MM  ----------  C20P10_1MM  C20P10_1MM  C20P10_1MM
C20P10_1MM
#   L5_H  C20P10_1MM  C20P10_1MM  ----------  C20P10_1MM  C20P10_1MM
C20P10_1MM
etc. etc.
2. menu
smart_route (min_via_grid 0.001) (min_wire_grid 0.001) (auto_fanout on)
(auto_fanout_via_share on) (auto_fanout_pin_share on) (auto_testpoint off)
(auto_miter off)
# Smart Route: This board is already 82.53% completed.
# Using modified smart_route algorithm.
# Smart Route: Executing 50 route passes.
# Current time = Mon Oct 17 13:17:42 2005
#
#    VIA       TOP        L3_V        L5_H        L8_H       L10_V
BOTTOM
#
#    TOP  ----------  C20P10_1MM  C20P10_1MM  C20P10_1MM  C20P10_1MM
C20P10_1MM

etc. etc.

############################################################################
#####

 Are you trying to start Specctra "automatically" by using the Allegro route
pulldown menu > > >?

I have not used that method but when I tried it just now I didn't get it to
work as  I expected it to.

 Try the old fashion method outlined in my test that worked (export .dsn
then start Specctra loading the .dsn then execute your commands) or provide
a little more detail as to how you are starting up.

 Do you have the same problem if you run 15.2 if no you may have a software
installation problem.

 Hugh Allen
 Specctra Specialist
 CopperCad Design Inc.
 www.coppercad.com
 hugh@xxxxxxxxxxxxx


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gennadiy
Kiryukhin
Sent: Monday, October 17, 2005 12:24 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Syntax error in 15.5 router


Hello group,

I am trying to route a board in PCB Router v 15.5. For some reason the
routing
commands (route, fanout,smart_route) do not work. The router tells me I have
a
sintax error in my command. I get the same messages even when I select
commands
from the menu.

smart_route
# <> Syntax error in command: token 1 = smart_route
# (content): smart_route
# <> Bad command not executed!
# <> Bad command not executed!

Only the chosen one may route....?




-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: