[PCB_FORUM] Re: Swapping layers?

From: "Shanmugam, Nagaraj" <nshanmug@xxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Tue, 26 Aug 2008 17:24:12 +0530

Austin,

Subdrawing can help you in swapping layers.

Export subdrawing of layers individually
Open the subdrawing in text editor - change the layer subclass and save
the file.
Delete the traces/shapes on layers
Import subdrawing into design.

This way works for me faster.

Thanks,
Nagaraj.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Tuesday, August 26, 2008 5:12 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Swapping layers?

Hi,

Is there an easy way to swap two layers?  15.7

Thanks,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Follow-Ups:

[PCB_FORUM] Re: Swapping layers?
From: Austin Franklin

[PCB_FORUM] Re: Swapping layers?
From: Baumstark Michael-EMB043

[PCB_FORUM] Pick and Place output from Allegro...
From: Austin Franklin

References:
- [PCB_FORUM] Re: How do I generate the drill tool file?
  - From: William Billereau
- [PCB_FORUM] Swapping layers?
  - From: Austin Franklin

[PCB_FORUM] Re: Swapping layers?

Other related posts: