[PCB_FORUM] Re: Star Routing Pin Pair Properties
- From: "Naren" <naren.thesia@xxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 21 Nov 2005 10:03:08 +0530
Hi Dave,
You can create pin pair in constraint manager & specify the length for each.
Regards,
--
Naren Thesia
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Friday, November 18, 2005 7:16 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Star Routing Pin Pair Properties
Hello All,
I'm just slammed and I need a refresher.
I need the constraint syntax for the pin pairs.
Star Topology routing.
One net.
Three branches into the center, two branches out
of the center.
J1.1 is the center of the star.
This part of the net need equal length:
U1.1 - J1.1
U2.1 - J1.1
U3.1 - J1.1
This is part of the same net and needs to be equal length:
J1.1 - U5.7
J1.1 - U6.7
Is this possible all on one net?
Thanks,
Dave
--
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560
Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297
Dave.seymour@xxxxxxxxxxxx
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
____________________________________________________________________________
_
Scanned by Sanmina-SCI eShield
____________________________________________________________________________
_
_____________________________________________________________________________
Scanned by Sanmina-SCI eShield
_____________________________________________________________________________
- References:
- [PCB_FORUM] Star Routing Pin Pair Properties
- From: Dave Seymour
Other related posts:
- » [PCB_FORUM] Star Routing Pin Pair Properties
- » [PCB_FORUM] Re: Star Routing Pin Pair Properties
- [PCB_FORUM] Star Routing Pin Pair Properties
- From: Dave Seymour