[PCB_FORUM] Re: Specctra placing vias in positive groundplanes
- From: "richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 10 Mar 2005 16:57:30 +1300
Many thanks to those who replied.
>>> hugh@xxxxxxxxxxxxx 10/03/2005 10:22:40 a.m. >>>
Hi Richard:
You can convert your positive planes to wire keepouts (vias ok) with
some
spif commands given on the Allegro command prompt prior to exporting
the
.dsn and rules.
set spif_keepout_for_shapes
set SPIF_USE_WIRE_KEEPOUT (converts route keepouts (wire and via)
to
just wire keepout)).
If you are auto routing on the layers with the positive plane -->
keepouts,
you will need to consider the area to various copper (wire, via etc.)
clearances, which default to 0 for areas. Appropriate values can be set
in
Specctra keeping in mind that what ever they are set to, applies to all
area
instances (keepouts, keepin, etc)
A bonus: Specctra runs much faster with many keepouts, than with many
positive planes of the same shape.
Good Luck
Hugh Allen
Specctra Specialist
CopperCad Design Inc.
www.coppercad.com
hugh@xxxxxxxxxxxxx
-----Original Message-----
From: richard moffat [mailto:richard.moffat@xxxxxxxxxxxxxxxxxxx]
Sent: Wednesday, March 09, 2005 3:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Specctra placing vias in positive groundplanes
Hi all
I think this was solved some time ago, but I can't remember the
solution:
If I have positive planes, say on top side, Specctra treats the
positive planes as a via keepout. How do I tell Specctra that it's OK
to put vias there for other signals?
Cheers,
Richard
NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
