[PCB_FORUM] Re: So what was the solution to the shape problem?

 
Because of the way dynamic shapes work, the shape fill is probably blanked
because it is under your real shape.  Try turning the shape boundaries on:
Display > Color Visibility > Stackup > (whatever layer) Boundary and see if
the shape boundary is visible in that area...
 
 
-- 
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272         Fax: 503-627-5587 <http://www.tektronix.com/> 
http://www.tektronix.com     <http://www.pcb-designer.com/>
http://www.pcb-designer.com

It's my opinion, not Tektronix' 

-----Original Message-----
From: Gene Carman [mailto:gcarman@xxxxxxxxxxxxxxx] 
Sent: Friday, December 17, 2004 18:25
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] So what was the solution to the shape problem?


"Film contains DRC error"
 
Shape at "location" contains void at "different location" which touches
another shape.
 
 
Any fix for this...  seems some of you Gurus had something.  I am now in
version15.2 S032.  
 
The "location" is the starting vertex of the main shape fill.  There is
nothing resembling a void or even "another shape" at the problem location.  
 
Thanks

Other related posts: