[PCB_FORUM] Re: Skill delete area
- From: "Dave Mattice" <DMattice@xxxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 26 Apr 2007 11:39:07 -0700
Clinecut is what I have been using for a long time.
Do you know about this one?
Not sure about attaching this file here. Is it ok?
If not, send me your email address and I will send it to you.
davemattice
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Thursday, April 26, 2007 11:31 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Skill delete area
One of the cool features of an old software Allegro add-on product was
delete by area. This cut traces nicely to a window pick.
Does anyone know of a skill routine that does this?
Thanks
Dave
--
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560
Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297
Dave.seymour@xxxxxxxxxxxx
************************************************************************
*********************************
"This e-mail (and any attachments) is confidential and privileged
information of Catapult Communications"
************************************************************************
*********************************
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
- References:
- [PCB_FORUM] Skill delete area
- From: Dave Seymour
Other related posts:
- » [PCB_FORUM] Skill delete area
- » [PCB_FORUM] Re: Skill delete area
- [PCB_FORUM] Skill delete area
- From: Dave Seymour