[PCB_FORUM] Re: Shorting two or more nets together

  • From: "Carrow, Dennis" <dcarrow@xxxxxxxxxx>
  • To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Tue, 10 Jan 2012 15:37:57 +0000

So I follow the doc when building by symbol but I have pad to pad errors 
because I have via pads inside of a larger pad.  I see on figure 3 of the ap 
note they have pad to pad errors also.   So do I leave these errors or am I 
missing a step?  Thanks! -DC

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gerry Meier
Sent: Monday, January 09, 2012 4:30 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Shorting two or more nets together

Try this

Gerry Meier, Sr. PCB Designer
Freedom CAD Services. Inc
Voice: (256) 715-1424
Email:gerry.meier@xxxxxxxxxxxxxx
Skype: rgmeier3
visit us at http://www.freedomcad.com<http://www.freedomcad.com/>
 P  Think Green only print as needed.

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Carrow, Dennis
Sent: Monday, January 09, 2012 4:27 PM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] Shorting two or more nets together

Hi Everyone,
                Can I ask how to properly short two or more grounds at a common 
point using Cadence Allegro 16.X and Design Entry HDL?  Thanks for any and all 
ideas! DC

Other related posts:

  1. Home
  2. icu-pcb-forum
  3. Archive
  4. 01-2012