[PCB_FORUM] Re: Shape won't fill

Kevin:
I think one of our desigers had this problem with dynamic shapes
in Allegro 15.1
We deleted all the dymanic shapes and recreated them as
static and everything was fine
Les Wong

Kevin McCowan <kmccowan@xxxxxxxxxxxxxx> wrote:
Ok, my turn.
I have a plane layer filled with a plane.
I have cut out (or overlayed) 3 smaller plane cutouts.
2 of them are no problem. One of them refuses to fill.
When I move it off the board it fills fine, back on, empty.
I redrew it and deleted the original, same thing.
I z-copied to another layer and it filled. Z-copy it back
and empty. I haven't tried changing the net, yet.
Cadence just send out an advisory that said if this happens
move it zero and put it back down and it will fill. NOT!
I made it static and it filled. Now I need to void all of
the vias and pins. If I select all of the vias and pins
it says "error: no shape left after voiding". If I select
a small bunch of vias (20-25) and pins it works. But it
takes literally 40 minutes to complete each time.
I have a dual 3.06G xeon with 1G mem.
It is the last net in the design and I have been fighting
this *&@$%! thing for 3 days.
Any ideas?

Oh, by the way, our maintenance expired, money issues.
We'll pick it up again next year (I hope). I have not
been able to contact cadence on this due to that.

Much thanks in advance,
Kevin McCowan
Sr PCB Designer
TSI Telsys
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! 
Better yet, join our jobs listing forum.

SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: