[PCB_FORUM] Re: Shape shading?

From: Ed.Caldwell@xxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Wed, 31 May 2006 16:11:32 -0400

Go to user preferences - display
set "display_shapefill:" to 4 (Allegro should default to 4 if left blank) 
the number sets the number of pixels skipped
your setting is likely 1 (one)





gnieski_mike@xxxxxxx 
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
05/31/2006 04:00 PM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx


To
icu-pcb-forum@xxxxxxxxxxxxx
cc

Subject
[PCB_FORUM] Shape shading?






                 Hopefully someone can answer this for me. I would like to 
see if
anyone knows
                 how to make shapes "shaded"? My shapes come in totally 
solid while
others in
                 my group have them nicely 1/2 or 1/4 shaded where you can 
see
through them
                 to other shapes or etches below. I have tried everything 
in the user
preferences
                 and have found nothing that works. I am on a Sparc using 
Solaris.
Any help is
                 appreciated.

                 thanks,
                 Mike Gnieski
                 EMC2 Corp.
                 Hopkinton, MA 

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

References:

[PCB_FORUM] Shape shading?
From: gnieski_mike

[PCB_FORUM] Re: Shape shading?

Other related posts: