[PCB_FORUM] Re: Shape clearance to pin on same net as shape...

Hi Dave,

I was able to get that controlled the way I wanted it by using the
properties of the individual pins.

Thanks!

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Dave Schaefer
> Sent: Monday, June 15, 2009 10:16 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Shape clearance to pin on same net as shape...
>
>
> ? You don't mention what you want ?
>
> There are some good controls on individual pins "DYN_*", one I
> use a lot when I want to locally override shape clearances /
> connections / thermals is "DYN_THERMAL_CON_TYPE".
>
> Hth,
> Dave
> >
> > From: "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
> > Date: 2009/06/15 Mon AM 08:55:56 CDT
> > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > Subject: [PCB_FORUM] Shape clearance to pin on same net as shape...
> >
> > Hi,
> >
> > I did a clearance override in the shape properties for shape to
> SMD pins,
> > and now it takes that as clearance to a pin that is on the same
> net as the
> > shape, and voids around the pin.  That's not what I want.  Any
> suggestions
> > how to fix this?
> >
> > Picture attached (if attachments come through that is).
> >
> > Best Regards,
> >
> > Austin
> >
> >
>
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: