[PCB_FORUM] Re: "Scrubbing" rules/bus/matchgroup in Allegro Constraint Manager...

If you create a .tel file you could delete the $Properties section.
  ----- Original Message ----- 
  From: Austin Franklin<mailto:allegrolist@xxxxxxxxxxxx> 
  To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx> 
  Sent: Monday, May 11, 2009 12:35 PM
  Subject: [PCB_FORUM] "Scrubbing" rules/bus/matchgroup in Allegro Constraint 
Manager...


  Hi,

  I have my busses, matchgroups, ecset references and diff pairs defined in my
  schematics.   In order to read in new information in the netlist, I need to
  delete the old info manually for these in the constraint manager.  Is there
  an easy way to do this aside from selecting them and hitting "delete"?

  Thanks,

  Austin

  -----------------------------------------------------------
  To subscribe/unsubscribe: 
  Send a message to 
icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
  with a subject of subscribe or unsubscribe

  To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/<http://www.freelists.org/archives/icu-pcb-forum/>

  Problems or Questions:
  Send an email to 
icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
  -----------------------------------------------------------

Other related posts: