[PCB_FORUM] Re: Scroll up arrow doesn't work on reports.

From: "richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx>
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Date: Fri, 15 Jun 2007 13:24:30 +1200

Heh heh - it doesn't either.  

>>> "Dale Rasmusen" <dale.rasmusen@xxxxxxxxxxxx> 15/06/2007 12:03 p.m. >>>
Has anybody noticed that when running reports like Component Pin Report,
that the report's scroll bar up arrow key doesn't function (15.7)?

 

DR

 


NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Follow-Ups:

[PCB_FORUM] Re: Scroll up arrow doesn't work on reports.
From: rjbzxr

References:
- [PCB_FORUM] Netlist import error 15.5 and CIS
  - From: Dharma Kemp-Bresett
- [PCB_FORUM] Re: Netlist import error 15.5 and CIS SOLVED
  - From: Dharma Kemp-Bresett
- [PCB_FORUM] Scroll up arrow doesn't work on reports.
  - From: Dale Rasmusen

[PCB_FORUM] Re: Scroll up arrow doesn't work on reports.

Other related posts: