[PCB_FORUM] Re: Schematic drafting practices

Hi Alan,

> Some things that are very useful on the first page of the schematic:
>
> 1.  A table of contents specifying what functional sections are
> on which page(s) of the schematic.

And a block diagram.

> 2.  A table of power/ground pins for all ICs on the schematic.

I see no reason for that one these days.  What's your reason?  All
power/ground pins should be shown on the components, and large devices have
them on separate symbols, as we've discussed here.

> 3.  A table of test points with signal names and page numbers
> where they show up.

I'm not sure I'd put that on the first page, but it isn't a bad idea to put
that information in a table somewhere.

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: