[PCB_FORUM] Re: [SUSPECT ATTACHMENT] Re: Help with uprev batch file

Sometimes you need to use the DOS 'For/Do' command. 
In a command prompt window type ;
for %1 in (*.brd) do uprev %1
Make sure you are in the directory where the board files are. It will
take each filename before the extension and enumerate each one.
 
George used the uprev_overwrite command. It may not give you an 'out' if
you want to go back , unless of course you've copied all the files to a
new directory. 
 
Hope it helps,
 
Andrew

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani,
Stephen
Sent: Friday, September 16, 2005 11:50 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [SUSPECT ATTACHMENT] [PCB_FORUM] Re: Help with uprev batch file


Thanks George but I believe my problem is getting a batch file to work.
Looks like the overwrite works but it stops at the first design. I have
attached my batch file. I have 3 designs but the file only upreved 1
 
Steve

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Friday, September 16, 2005 1:37 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Help with uprev batch file



 

Try copying all the boards to their _15 names, then running
uprev_overwrite  *_15.brd

 

DISCLAIMER:  I haven't done this in a LONG time, but I think that it
should work.  Your mileage may vary.

 

-- 
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272         Fax: 503-627-5587
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/> 

It's my opinion, not Tektronix' 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mariani,
Stephen
Sent: Friday, September 16, 2005 10:17
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Help with uprev batch file

 

I would like to uprev a bunch of designs from 13.6 and 14.x to 15.2 
I am not sure how this is done in a batch file, can someone help? Please
see below. 

What I would like it to do is the following: 

uprev 
board_a    (old 13.6 design) 
board_a_15 (15.2 updated design) 
board_b    (old 13.6 design) 
board_b_15 (15.2 updated design) 
board_c    (old 13.6 design) 
board_c_15 (15.2 updated design) 

The dos window sits there asking for a board name but not sure how to
have it add the name in this file? 
Then it will ask for the new name. What is the command to enter text to
dos? 

Thanks 
Steve 

 

Stephen Mariani 
Mercury Computer Systems, Inc. 
199 Riverneck Road 
Chelmsford, MA 01824 
Phone: (978) 967-1855 
Cell Phone: (978) 761-4101 
Fax: (978) 244-0520 
mailto:smariani@xxxxxx <mailto:smariani@xxxxxx>  

------------------------------------------------------------------------
- CONTENT ABOVE THIS LINE IS *NOT* FROM CISCO INFORMATION TECHNOLOGY
------------------------------------------------------------------------
- WARNING: This message has an attachment that could contain executable
code. Please review the attachment carefully to ensure you do not
inadvertently execute embedded programs that could contain viruses. We
suggest you review the following URL to stay up-to-date with current
virus threats:
http://wwwin.cisco.com/support/library/mcafee/virus_info.shtml Please be
aware many viruses attempt to look like legitimate email or
notifications from anti-virus systems. We will clearly mark a seperation
between our notifications and the original email as follows: "CONTENT
ABOVE THIS LINE IS *NOT* FROM CISCO INFORMATION TECHNOLOGY" For further
reference information about viruses and email antivirus efforts within
Cisco, please visit: http://wwwin.cisco.com/it/ems/services/antiviral If
your concern isn't addressed by the information in this notification or
the above web page, you may open a support request:
http://wwwin.cisco.com/support/ Select "Messaging", "Email-Related",
"Mail Routing" Please include in the text of your case the following
information: * Full headers of the message. Documentation on displaying
the full headers is available at this URL:
http://wwwin.cisco.com/support/library/faqs/solution002471.html * This
unique quarantine identifier: j8GIpQVh001182 If the matter is urgent,
you may follow up by calling one of the below referenced numbers. Please
make every effort to provide the above requested information via the
support web tool prior to calling as it will greatly aid the resolution
of your issue. Americas: 1 408 526 8888 Asiapac +61 2 8446 8888 EMEA +31
20 485 4888 Japan +81 3 5549 6888 US (Toll Free) 1| 800| 888| 8187|
(ext.68888) Thank you for your cooperation, Enterprise Messaging
Services Cisco Systems, Inc

Other related posts: