[PCB_FORUM] Re: SPB16.2 - Can't change impedance value in Cross section menu

Hi Ed,

I have upgraded to the latest ISR.  I have been working with Tech
Support and as it turns out, it is a bug that is supposed to be fixed on
the next ISR.  It's only a problem if you don't have any of the SI
licenses installed with 16.2.  We are using Allegro performance option L
with no SI licenses.

Mike Crittenden
Technology Services Corporation, Phase IV Operation
(256) 535-2118

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Hickey
Sent: Wednesday, January 07, 2009 2:34 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: SPB16.2 - Can't change impedance value in Cross
section menu

Mike,

Can you try upgrading to the latest 16.2 ISR? A hotfix was issued for
this problem on Dec 20th.

Ed
 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Crittenden,
Mike
Sent: Wednesday, January 07, 2009 1:24 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] SPB16.2 - Can't change impedance value in Cross
section menu

Hello All,

Just upgraded to 16.2 and when I try to chance the impedance value in
the cross section menu, it is stuck on 60 ohms.  Any suggestions?

Thanks!

Mike Crittenden
Technology Services Corporation, Phase IV Operation
(256) 535-2118


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: